Installation of new and used ACs, and safe removal, moving and reinstallation of your AC from one home to another, with pipe extension and a cooling test before we leave.
Many AC faults come from poor installation: an indoor unit on a tilt that leaks water, loose joints that leak refrigerant, or an outdoor unit placed where air can't reach it. That is why we take as much care with installation as we do with repairs. We install new and used split and window ACs in homes, shops and offices in Najran. We choose the position of both units, fix the brackets firmly, run the copper, drain and power lines at a suitable length, and tighten and test every joint before switching on. If you are moving to a new home, we remove the AC in a way that keeps the refrigerant inside the outdoor unit, move it safely, then reinstall it in your new home and test the cooling in front of you.
Send us the number and type of ACs and the address of the home, or both homes if you are moving.
We agree with you on where the indoor and outdoor units go and the pipe route.
We mount both units, run the pipes, drain and power, and tighten the joints.
We run the AC and check the cooling and drainage in front of you.
Tap a photo to enlarge it
Enter your details, the number of ACs and the address, and we'll contact you to set the appointment.
Tap a service to request it directly on WhatsApp
Small details that prevent big faults
We set the indoor unit's slope so condensate flows to the drain and doesn't leak down the wall.
We tighten and test the copper joints so no refrigerant leaks after installation.
We choose a spot with good airflow, away from trapped heat, so the AC runs efficiently.
Moving an AC to a new home
Remove, move and reinstall
We pump the refrigerant down into the outdoor unit before removal, so in most cases you won't need a recharge.
We connect the AC with a cable and switch rated for its capacity, to protect the AC and your home.
We run the AC and check the cooling and drainage before we leave, and the work comes with a warranty.
